Automist Sprinkler Alternatives
Fire Inclusive Design Ltd are the Approved Reseller and Installers for the Automist system
in Yorkshire. We specialise in the specification, installation, maintenance & commissioning
of Automist, the award-winning fire protection innovation which provides developers
with design freedom and flexibility for open plan spaces, in new builds, refurbishments or loft conversions. We are fully trained to ensure that every project is installed to the very
highest standards and can also provide guidance and assistance in obtaining building
control approval from local authorities or approved inspectors.
|
Potential benefits of using Automist to meet building regulations: • Providing separation from risk areas • Providing a protected route out from the loft rooms to a final exit at the ground floor after a loft conversion or when creating an open plan arrangement • Providing protection when fire doors are either removed or downgraded • Providing compensatory protection when fire service access is extended Click here to download technical information about Automist and it's applications. |
![]() |
Why Automist?
The home is the place where we should all feel safest. While smoke alarms and fire extinguishers provide a crucial warning against fire, they require human intervention to prevent or stop the spread of a dangerous fire. In contrast, Automist offers active protection and is triggered automatically. It uses industrially validated watermist, and was extensively tested and proven to be effective by BRE Global in Watford.
• No False Alarms – Automist is triggered by a reliable heat alarm. Unlike smoke alarms (optical and ionisation), a heat alarm won’t go off accidentally even when cooking as it requires an ambient temperature 35˚C above typical room temperatures to be triggered.
• Lack of disruption - Automist is easy to retrofit and can be installed in approximately 2 hours. Preparing the site may require an electrician with a Part P electrical qualification as Automist must not share a mains circuit or RCD with appliances and sockets in the same room.
• No Human Intervention – Automist triggers automatically. When faced with an uncontrolled fire it is best practice to "get out, stay out and dial 999", as most individuals are not trained to deal with fires and could potentially face severe injury or death if their attempts to extinguish fires are unsuccessful.
• Low Maintenance – The only maintenance is annual commissioning. During commissioning, the pump runs for approximately 20 seconds, whilst the nozzles are covered and the output pressure is monitored.
• Prevent damage to your property – Automist can be used to protect fire hazards identified by a fire risk assessment. When a fire starts in a house it can spread quickly. Independent testing showed that Automist can quickly suppress and control fires, and in doing so it reduces the dangerous levels of toxic gas and temperatures. It utilises only 5% of the water usage of a traditional sprinkler system and therefore minimises consequential water damage and runoff.
• Best value – Automist offers effective active fire suppression, without many of the shortcomings of traditional sprinkler systems, such as high price, excess water damage on activation, and difficulty to install and maintain, which have prevented them from being cost effective in a domestic setting (Source: BRE report No. 204505 - “The effectiveness of sprinklers in residential premises”).
Automist can open up opportunities and design flexibility, helping our clients reduce their costs when meeting building regulations.
Fire Risk Assessments
A fire risk assessment identifies areas of non-compliance which can be expensive to rectify.
We understand that each business and building is different and therefore needs a bespoke solution.
Training
Once we are confident that your fire safety needs have been met we can work with you to train your staff to give them the tools they need to keep to keep you compliant. This will save
you money year after year.